Shop headings: New Spares | Used Spares | Accessories | Brands
34 Results - Page 2 of 4
Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow
This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Cagiva Elefant E750, Ducati 748
£26.00
INC VAT
£21.67 EX VAT
Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease
This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement
This part is due back in stock soon, call 01484 841395 to reserve yours
10273920 GU10273920 10 27 39 20
1027 3920 1027.3920 10.27.39.20
Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota
£26.00
INC VAT
£21.67 EX VAT
Pair of EBC FA095 brake pads for Brembo 5165 single pin four piston calipers
We advise checking your front caliper(s) have one not two pad pins
4 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
Also fits Magni Sfida
£18.80
INC VAT
£15.67 EX VAT
Pair of sintered EBC FA095 HH brake pads for Brembo 5165 single pin four piston calipers
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round. We advise checking your front caliper(s) have one not two pad pins
2 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
£24.40
INC VAT
£20.33 EX VAT
Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers
We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors
Highest friction level available for motorcycle racing
Developed by world champions for future world champions
Stable friction level achieving excellent modulation
Fast bedding-in period
Applications to fit all major racing calipers
Suitable for stainless steel and cast iron discs
2 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
£20.50
INC VAT
£17.08 EX VAT
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.
Caliper seal kit
2 in stock
£34.00
INC VAT
£28.33 EX VAT
Rebuild kit for Brembo Radial Calipers with 34mm pistons fitted to the front of these models. Contains seals, brake grease, washers, bleed screw and dust cap. One kit required per caliper.
Caliper seal kit
This part is available by special order, request a quote
£33.00
INC VAT
£27.50 EX VAT
Piston for oil pressure relief valve in lower crankcase
This part is due back in stock soon, call 01484 841395 to reserve yours
31150950 GU31150950 31 15 09 50
3115 0950 3115.0950 31.15.09.50
£12.00
INC VAT
£10.00 EX VAT
Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.
NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722
2 in stock
20391310 GU20391310 20 39 13 10
2039 1310 2039.1310 20.39.13.10
Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)
£20.00
INC VAT
£16.67 EX VAT